Handlebars

Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g

The Next R handlebar features 800mm of premium unidirectional carbon with the shred-ready positioning of Race Face's SixC bars. DH strength and Enduro weight for when you really need to lean into it. - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - 35mm bar diameter for incredible strength/weight ratio

This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty

Mass is the enemy of performance, so we pulled out all the stops to make the Alpinist Cockpit the lightest one-piece bar/stem combo that passes our standards; at 255 grams (110 mm x 420mm). Not only does light weight make for faster climbing, it also improves acceleration and ride quality. The Alpinist Cockpit's round tube shape and tradition bend respect tried and true forms, but the optimized composite layup and internal cable routing are decidedly modern. Available in 10 sizes, there's one that will fit you perfectly. And because they are backed by a no-fault crash replacement policy and lifetime warranty, you can rest easy knowing that we've got your back. - Bend: Tradition radius ( 125mm Drop / 75mm Reach) - Clamp Diameter: 31.8 - Compatibility: Shimano, SRAM, Campagnolo; Di2 and EPS - Material: Advanced carbon composite - Sizes: 400 mm x 80/90/100mm; 420mm x 90/100/110/120mm; 440mm x 110/120/130mm - Stem Angle (Rise): 6-Degrees - System Weight Limit: 275lbs / 125kg - Weight: 255 grams (110 mm x 420 mm)

Unparalleled comfort A carbon road handlebar with IsoCore that reduces road vibration by 20% and features a variable compact radius that offers additional ergonomic positions. Chain-rattling pavement is no longer an issue thanks to our innovative IsoCore technology in this Pro IsoCore VR-CF road bar. An additive to the carbon layup, IsoCore mutes 20% more vibration than other carbon bars. Features Di2 compatible ports for clean internal wire routing when integrated with Shimano EW-RS910 bar-mounted Di2 junction. Once you experience the comfort and control of IsoCore, you'll never want to ride another bar. - OCLV carbon with IsoCore continuous inner-laminar technology - Replaceable IsoZone EVA pads maintain original grip diameter - Variable Radius Compact Flare (VR-CF) bar shape offers greater comfort in all hand positions - IsoCore technology decreases road vibration by 20% over traditional carbon bars - Compatible with clip-on aero bars - Includes four replaceable EVA IsoZone pads for tops and drops - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing

This mid-rise handlebar provides smooth lines and pure comfort - Black powder coat - 1"(25.4mm) clamp, 5.25" rise, 27" wide - Handmade in Maysville, Kentucky

Looking for a great way to speed up your road bike for a weekend triathlon, or need a more aerodynamic position for your usual route? Bontrager's Race Clip-on Aerobars and extensions let you dial in a comfortable aerodynamic position with adjustable pad width, pad angle, and extension length. These clip-on aerobars have increased hand clearance for use on a road drop bar and the carbon friendly clamps fit 31.8mm or 26mm bars.

With a classic 25.4mm clamp diameter, the extra-tall 30mm of rise gives way to comfort and added control for an economic option for any classic mountain bike build. - Material: 6061 alloy - Width: 670mm - Rise: 30mm - Backsweep: 9° - Upsweep: 2° - Clamp diameter: 25.4mm - Bar-end compatible: yes - Weight: 399g

Whisky's all-carbon Spano Drop Handlebar is designed to give gravel and all-road riders the most natural hand positions anywhere on the bar. A multi-stage flare puts the hoods at an optimal angle for comfort while maximizing control through the drops. The bar's flat top promotes flex and offers relief from rough surfaces, and its 31.8 clamp diameter with 90mm width allows compatibility with bar-mounted accessories, including aero bars. - Available in five widths, measured center-to-center at the hoods: 40, 42, 44, 46, 48cm - Compound flare — 12 degrees at the hoods and 20 degrees through the drops - Drop/Reach: 100mm/68mm - 31.8mm clamp diameter Specifications: - Bar Top Style: Flat - Width Measurement: Center - Bar Clamp Diameter (mm): 31.8 - Accessory Mount Diameter: 31.8 - Bar Reach (mm): 68 - Material: Carbon - Clip-on Compatible: Yes - Bar Drop (mm): 100 - Flare: 20 - Defined Color: Black - Weight: 236 - Drop Bend Style: Compact

On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm

A gravel handlebar with a wider flare that gives riders more comfort and control through any terrain. The bar with a flare for adventure The GR Elite Road Handlebar is a lightweight alloy bar designed to give gravel and adventure riders more comfort, control, and confidence, especially when in the drops. IsoZone EVA pads deliver entire-ride comfort, while the bar's 75mm reach, 128mm drop, and 13-degree flare make it easy to access brake levers and shifting controls from all riding positions. Product details - 13-degree flare allows for more control in the drops - Custom-butted, lightweight 6061-T6 alloy construction - Shorter reach and wider flare allows for confident handling and easy access to controls - Replaceable IsoZone EVA pads add comfort while maintaining original grip diameter - Compatible with Shimano EW-RS910 bar end Junction-A for cleaner Di2 routing - Laser-etched brake lever position lines for spot-on control setup - Compatible with clip-on aero bars

Truvativ design built in collaboration with, and featuring the creativity of, Troy Lee Designs. The Truvativ CoLab TLD bar is the command center of cornering with an artistic flair. - Includes Rockshox sticker pack to give fork and handlebar a unified custom look - Stiff, precise and wide - Signature Troy Lee Designs style - Geometry and 7050 aluminum are designed for DH and gravity events - Back Sweep (deg): 9 - Upsweep: 5 - Weight: 349g - Material: Aluminum

Race Face Atlas riser handlebar with an anodized, shot-peened finish. - Aonodized, shot-peened finish - Cold-drawn and butted proprietary AirAlloy aluminum tubing - 4 degree upsweep

- Intended use: XC and Trail - Proven design and durability of the Race Face Next SL bar with increased stiffness and lighter weight of the 35mm platform - Manufactured from UD Carbon with matte clearcoat - Requires 35mm bar clamp diameter stem - 8 degree rearward sweep, 5 degree upward sweep

Dimension Road handlebars are available in 25.4 and 26.0mm clamp diameters and have double grooves for cable routing.

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Material: Al-7050 - Width: 800mm - Backsweep: 9-degrees - Rise: 25mm - Upsweep: 5-degrees - Colors: Black

Race Face's flagship carbon DH rated handlebar just got wider. With the push to 820mm the new Sixc 35 handlebar gives unprecedented control at high speed, just what you need for UCI DH races, high speed park laps, or that next challenging AM adventure. Featuring Race Face's tried and true sweep design to get you in the attack position on the bike and uses their UD carbon wrap that gives the Sixc 35 strength you can believe in at a mind numbing 235g. Save weight and gain control? You just lost an excuse… - Manufactured from UD Carbon with matte clearcoat - Carbon optimized flex for improved small bump compliance - Gold Standard of DH is now wider and stronger - 820mm width for maximum control

Dimension short drop road handlebars are available with a 26.0mm clamp diameter and sport single-groove cable routing. - Made from 6061 Aluminum - Single-groove cable routing - Accessory Mount Diameter (mm): 26.0 - Bar Clamp Diameter (mm): 26.0 - Bar Drop (mm): 128 - Bar Reach (mm): 80 - Bar Top Style: Round - Clip-on Compatible: No - Drop Bend Style: Compact - Material: Aluminum - Weight: 340g (40cm) - Width Measurement: Center

The Race Face Aeffect handlebar is a budget-friendly alloy bar intended for XC and Trail use — the most affordable option for riders looking for a 35mm handlebar. - Shot-peened to increase fatigue resistance - 35mm bar diameter allows for additional material to be shaved from the handlebar, while retaining stiffness, strength and performance - Manufactured from cold drawn, seamless aluminum - Upsweep: 5° - Backsweep: 8°

The Atmos 7k aluminum riser bar series feature a 9° backsweep and 760mm width that is trimmable by 30mm at each end for a possible width of 700mm. The bar is available in 3 rise variants: 0mm, 10mm and 20mm. Made from tough 7050 Lightweight aluminum, the bar weighs just 250g at full width. - 760mm wide - Wide to start and trimmable by 30mm each side - Made from tough 7050 lightweight aluminum SPECIFICATIONS - Type: Riser - Application: XC - Clamp Diameter: 31.8mm - Width: 760mm - Backsweep (degrees): 9

An quick way to make a bike more comfortable, Dimension High-bars come in four different rises for inexpensive and easy bar-height changes. - Four rise options available from 30-100mm - AL-6061 aluminum alloy - ISO4210 Safety Tested for City/Trekking use - Not recommended for use with bar-ends or clip-on aero bars - 15-degree sweep

Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty

- Gull-wing handlebar for your classic cruiser needs - Add a touch of elegant simplicity to your next restoration project - Fits single stems - 1"(25.4mm) clamp, gentle 3" rise, 26" wingspan - Handmade in Maysville, Kentucky

FSA's Energy Compact handlebars push aluminum technology as far as it can go. Cutting-edge manufacturing allows us to form and manipulate high-strength 7050 aluminum tubing, varying the wall thicknesses and diameter throughout the bar. There's even an ergonomic flattened section on the tops, either side of the generous central bulge that gives plenty of room to mount accessories. A shallow drop and short reach are ideal for riders looking for a less aggressive riding position. The finish is sandblasted black on the taped areas for grip, with stylish polished anodizing on either side of the stem. - Aerodynamic Integrated Cable Routing (ACR) compatible - Semi-integrated Cable Routing (SCR) compatible - Double butted and tapered AL7050 - 34mm Ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails - Outward Bend: 4°

The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

Occupying a class all its own, our Winston Handlebar is a performance carbon mustache bar loaded with versatility and flare. Featuring a 25mm rise and 73-degree backsweep, it offers compatibility with road, mountain, and bar-end controls. Pretty enough to punch up commuter rigs and sport touring bikes alike, it's built tough to handle everything from rough, off-road conditions to long rides in the country. Comfortable in both the drop and riser positions, the unique and multi-functional Winston is sure to inspire upgrades and eye-catching custom builds. - Compatible with road, mountain, and bar-end controls - Tested to ASTM 3 - 90mm clamping area to fit Salsa Anything Cradle - Can be ridden in up or down position - Unidirectional carbon fiber construction - Weight: 250g

Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers

Budget-friendly mountain bars with stylish flair. - Plain gauge, tapered and shot-peened AL6061/T6 - Shot-peened for surface hardness - 15mm rise - 9° backsweep, 4° upsweep - Bar Clamp Diameter: 31.8mm - Material: Alloy - Width: 740mm

Alex D’s new signature ALVX bars, a classic BMX shape and only 28" wide, multi-butted chromoly sweetness and available in 3 height options.

The all-new Rapide Cockpit is a lot more than just the fastest way to the finish line. It's the fastest leading edge we've ever made, putting aero gains in the clean air, where they matter most and shaving four watts off the already ultra-quick two piece Rapide Bar and Tarmac SL7 Stem. But to deliver a leading edge that provides a winning edge takes more than pure aero. The goal for the Roval engineering team was simple—the Rapide Cockpit had to be the fastest bar we've ever made, with no compromises. It's aero, light, stiff, and designed hand-in-hand with the best riders in the world and our Retül fit experts so you can get a grip on victory. AERODYNAMIC: Removing the cluster of hardware (where stem and handlebar connect) allowed us to design the bar's leading edge a single airfoil. We optimized this airfoil to provide a maximum advantage in clean air at speeds seen from long solo breakaways to full gas World Tour sprints. While a four watt improvement may seem small, it adds up to a 32cm lead over a 250m final sprint. When races are won by bike throws, this is a winning difference. LIGHT AND STIFF: By removing the stem's hardware cluster the Rapide Cockpit is 50 grams lighter (100mm x 420mm) than a two piece Rapide bar and Tarmac SL7 combo. Made from premium high-modulus carbon fiber, that delivers ideal stiffness for the biggest, fastest sprinters on the World Tour, the Rapide Cockpit has a higher stiffness-to-weight ratio than any two piece system we've ever made. FIT: The downside of one-piece cockpits has long been fit, but we partnered with our Retül fit professionals and the best riders in the world to ensure almost every rider can find their fit. We offer 15 different stem and bar combos, all at -6 degree, so we've got your race day position covered. The radius from tops to drops has been sculpted for wrist clearance whether out of the saddle in a final sprint or tucked in an aero position, while bend and flare reflect our favorite Rapide bar. - Aerodynamically engineered to save 4 watts vs a traditional aero road bar - Material: Premium High Modulus Carbon Fiber, Titanium Stem Bolts - Sizes: 15 combos from (75mm x 380mm) to (125mm x 440cm) - Bend: 125mm drop x 75mm reach, 4 degrees of flare at the drops - Stem Angle: 6-Degrees - Steer Clamp Diameter: 31.8 - Weight: 310 grams (100mm x 420mm) - Cable Routing: Shimano, SRAM, Campagnolo ( Internal/Electronic Compatible) - Compatible with Roval bolt on computer mount, S219900058. - System Weight Limit: 275lbs/125kg