Skip to main content

Specialized S-Works Crux Di2

Specialized S-Works Crux Di2
This item is currently not available.

Details

When we set out to design a new 'cross rig, we didn't just want to make another adventure bike with added tire clearance—we knew we had to create a purebred racing steed that was fast, confident, lightweight, and rides like no other 'cross bike out there. And sure, with multiple Cyclocross World Championships to its name, the CruX has more than proven itself in 'cross, but we're proud to say that this CruX takes the legacy to a whole different level. The S-Works CruX is spec'd with the lightest components possible. Along these lines, it features a 1x groupset with a mix of Shimano's Dura-Ace and XTR components, lightweight, aerodynamic, and mud-shedding Roval CLX 50 clincher disc wheels, our S-Works Power Cranks power meter, and an S-Works carbon seatpost and handlebars.

- Starting with the frame, we implemented our Rider-First Engineered technology that was first introduced on our Tarmacs. Using size-specific tubes and layups, this technology allows the CruX to feature the same ride characteristics across every size in the range. Not only this, but it also allowed us to significantly drop the frame weight, so the CruX now comes in around a scant 900 grams for a 56cm (*dependent on frame size and color)—over 400 grams lighter than the previous frameset. A light and stiff frame alone isn't useful in a 'cross race if it isn't compliant, however, which is why the new CruX also combines stiffness and compliance in all the right places. And to assist with the latter, we lowered the seat collar by two centimeters for more exposed seatpost and cushion for big hits.

- We also know that cyclocross races are often won in the corners and over the barriers, which is why the CruX geometry takes this into account. The top tube has been designed for easy shouldering when you're hopping off to clear barriers, as it features a large opening to the front triangle and a flat bottom. For stability in the corners and on off-camber sections, the geometry has a low bottom bracket and a sharp front-end. This combination also helps to initiate corners, regardless of the terrain.

- With maximum mud-shedding ability in mind, we included eight millimeters of clearance on all sides of a 33mm tire, providing plenty of clearance for muddy conditions. After all, frame weight becomes irrelevant when it's covered in 10 pounds of mud.

Specs

Frame S-Works FACT 11r carbon, Rider-First Engineered, OSBB, 1-3/8" lower bearing, flat-mount disc
Fork S-Works FACT 11r carbon
Axles Front: 12 x 100mm thru axle
Rear: 12 x 142mm thru axle
Rims/Wheels Front: Roval CLX 50 Disc, carbon, tubeless-ready, Win Tunnel Engineered, 50mm depth, CeramicSpeed bearings, 21h
Rear: Roval CLX 50 Disc, carbon, tubeless-ready, Win Tunnel Engineered, 50mm depth, DT Swiss 240 internals, CeramicSpeed bearings, 24h
Tires Tracer Pro, 2Bliss Ready, 700 x 33mm
Crankset S-Works Power Cranks, single-sided power, BB30, 11-speed
Chainrings Praxis Wave Tech, 110 BCD, 42T
Bottom Bracket OSBB, CeramicSpeed bearings
Chain Shimano Dura-Ace, 11-speed
Rear Derailleur Shimano XTR M9050 Di2, Shadow Plus, GS cage, 11-speed
Cassette/Rear Cogs Shimano Ultegra, 11-speed, 11-32t
Shifters Shimano Dura-Ace Di2 Disc R9170
Tape/Grips Specialized CX Pro Gel
Stem S-Works SL, alloy, titanium bolts, 6-degree rise
Brakes Shimano Dura-Ace R9170, hydraulic disc
Pedals Nylon, 105x78x28mm, loose ball w/reflectors
Saddle Body Geometry S-Works Phenom, carbon rails
Seat Post S-Works FACT carbon 27.2mm, 20mm offset

* Subject to change without notice.

Reviews