Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Pair of EndCaps for Yakima CoreBar.
Pair of EndCaps for Yakima JetStream bars.
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Rear wheel strap for Boa bike mount. Includes one strap.
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
- Fat straps are used to carry over sized (fat) tire bikes on Two/Four Timer bike racks. - Includes two straps - Weight: 0.44 lbs. - Dimensions: L 15.50 in x W 1.00 in x H 18 in
Some vehicles require extra strap length. Compatible with Saris' Bones bike racks, the Saris Extra Long S-Hook Straps 80" are made of strong nylon with coated hooks that protect your car's finish.
$14.95 - $39.95
Use the RockyMounts Lock Cores to secure your belongings, whether you're using the TieRod, PitchFork, TailPipe, LiftOp or any other RockyMounts rack. Each pack of Lock Cores comes with two keys and one, two, four, six, or eight lock cores.
Simply insert Saris' Hitch Tite into the hitch receiver to give your Saris bike rack (sold separately) extra stability. The Hitch Tite is compatible with the Bike Porter Hitch 2-Bike, Freedom, Axis Steel, Axis Aluminum, Cycle-On, and T-RAX Sport racks.
Saris' Wheel Straps keep your front wheels from spinning and your handlebars from turning in the wind. They're made of tough nylon with easy-to-use buckle closures. Wheel Straps are sold in pairs.
1.25" to 2" Adapter for our Sherpa 2.0, NV 2.0, NV Base 2.0, Sherpa, Alpha, and Beta racks. - Not for use on our original NV rack.
Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.
Body for HitchLock. Requires SKS lock core. (Sold Separately) - Weight: 1.00 lb
Thule's Load Bar End Caps are replacement end caps for rectangular load bars.
Thru-axle adapter for the Kuat TRIO rack.
Fat bike skewer and thru axle tube adapters for the Küat Trio roof rack.
The LongArm Pad provides some extra protection when hauling gear on Yakima's LongArm truck bed extender. The pad combines durability and protection with a soft foam core and a ballistic nylon exterior that holds up over time. Hook and loop closures are designed to hug the LongArm’s crossbar tight and a center cutout allows side or centered placement. Sold as a single pad. PRODUCT DETAILS - Foam padding protects boats and other cargo from damage - Durable, ballistic nylon construction - Look and loop closures and 28” length perfectly fit around the LongArm crossbar - Center cutout allows side or centered placement on crossbar - Sold as a single pad TECHNICAL SPECS - Weight: 0.50 lbs - Dimensions: L 28.00in x W 3.00in x H 3.00in
Thru-axle adapter works with WheelHouse to hold wheels with 12mm and 15mm thru-axle. - Easy cam lever for quick installation - Durable stainless steel skewer - Up to 110mm front hubs Product Specs: - Weight: 0.44 lbs. - Dimensions: L 9.00 in x W 0.75 in x H 2.00 in - Limited Lifetime Warranty
Some of the best ideas are home grown in Colorado, and The Fattie is one of them. Easily convert your BrassKnuckles rack to fit your fat bike–the kit includes a larger wheel chock and 2 ratchet strap extenders.
An adapter for Thule TopRide/Thule FastRide to enable transport of bikes with 20x110mm thru-axles. - Enables transportation of bikes with 20x110 mm thru-axle forks
The TC2 Thule Wheel Tray End Caps are compatible with the following Thule Wheel Trays: Thule 594 Sidearm, 594XT Sidearm, Thule 599XTR Big Mouth, Thule 589 Velo Vise, Thule 590 V2, Thule 590R V2 Recumbent, Thule 591 Long Tray Classic, Thule 517 Peloton, and the Thule 518 Echelon. - Sold as a set of two - Replacement parts for broken or lost end caps
Provides a clean and sleek look for your Saris Bones rack, these end caps allow excess strap length to be tucked neatly inside rack - Provides a clean and sleek look for your Saris Bones rack - Upgrade your current Bones or Bones EX rack (pre-2022) - Compatible with: Bones or Bones EX racks - Not compatible to use with any Bones Hitch racks or SUPERBones
Increase rack stability for a smoother ride, this clamp system securely tightens hitch rack to receiver. - Adds extra security to bike racks and hitch devices - Eliminates rattling and wobbling - Compatible with 2" receivers
Saris' Protect-O-Pads are foam blocks that separate and protect your bikes when multiple bikes are being transported. They come in packs of four.
Yakima's Glass Hatch Hook is an alternative strap for "Joe" series racks used on cars where standard hooks cannot be used.
Fat bikes fit fine with long wheel straps to carry fat bikes on OnRamp. - Includes 2 FatStraps to carry one fat bike - Fits tires sizes up to 26x 4.5", 27.5" x 4.5" and 29x 3.25"
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty
Page 1 of 9 Next page